Sydney Camera Hire

Grip

Showing 1–16 of 26 results


  • Sydney Camera Hire’s 10′ jib with dual-rail design offers enhanced strength & stability for creating sweeping cinematic movements, expanding your creative flexibility. Ease of packing and a quick no-tool setup system maximizes its versatility. This travel-friendly Jib extends backward as per operator convenience for better control.

    The robust camera mount confidently accepts 75mm/100mm fluid heads. The Jib is designed to mount a camera of practically any size, weighing up to 25kg / 55lb. The jib adapts can be operated with Ronin/Movi Gimbals using separately available compatible adapters.

    This travel-friendly Jib telescopes from the backside, which helps in the balancing of Jib. You can adjust the arm length from 6 feet to 10 feet. The ability to change the length allows you to use the Crane in various scenarios.

  • If you are looking for easy to set up, light & travel friendly jib to pair with your DJI Ronin gimbal who Zheyun-Tech crane you cannot beat Sydney Camera Hire’s 13ft telescopic carbon fibre pole jib. The perfect travel companion, each section of the crane is collapsable and slides in/out when required.

    The jibs carbon fibre construction makes it advantageously lightweight, yet rigid enough to resist bending while supporting underslung or over-slung operations.

     

  • Sydney Camera Hire’s telescopic scissor camera crane lets you easily capture creative shots usually done with high-end and expensive Technocranes.

    Extending the scissor arm puts the camera right where you need it. The flexible motion allows the arm to open 17’ out and then retract back in.

    High-grade Aluminum Crane Frame is lightweight & durable enough to hold 3-Axis Camera Gimbals like the DJI Ronin 2 with a maximum payload of 24kg/53lb.

    The Powermatic Scissor allows you to achieve fluid movements of extreme precision without any difficulty.

    Steady Fluid Head ensures perfect alignment of your 3-Axis Gimbal on Scissor Crane.

    Tilt Lock allows you to fix the jib’s tilt angle to get linear tracking shots.

    Pan Lock enables locking the jib’s pan movement for achieving high/low angle shots.

    6LCD Mounting Arm helps in attaching an LCD monitor for better viewing of shots; the arm can be mounted left/right as per your requirement.

    High-Performance 12V DC motor ensures silent operation and drives the jib smoothly.

    The Precise Controller very conveniently push-out / pull-in the jib length and control the movements.

    The system is integrated with a V-Mount Battery Plate, which adapts a 14.8V V-Mount battery to power the drive system

    The high-speed special 70 steel bearings ensure outstanding durability & strength while providing smooth soundless movement every time you extend or retract.

    It is perfect for tight indoor spaces as well as on-location shoots. It even fits into a private vehicle.

  • Sydney Camera Hire’s 20″ Master C-Stand with Sliding Leg Kit (black) is a steel lighting support “C” stand composed of two legs that are spring loaded to open in fixed positions while the third leg is height adjustable by loosening the knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the other legs to level out the stand on uneven terrain or even stairs. The Kupo 20″ Master C-Stand rises to a maximum height of 198cm.

    Also included in the kit is one Grip Arm (either black or silver) and one 2.5″ Grip Head, again either black or silver as determined by the kit ordered.

  • Sydney Camera Hire’s 20″ Master C-Stand with Sliding Leg Kit (black) is a steel lighting support “C” stand composed of two legs that are spring loaded to open in fixed positions while the third leg is height adjustable by loosening the knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the other legs to level out the stand on uneven terrain or even stairs. The Kupo 20″ Master C-Stand rises to a maximum height of 198cm.

    Also included in the kit is one Grip Arm (either black or silver) and one 2.5″ Grip Head, again either black or silver as determined by the kit ordered.

  • Sydney Camera Hire’s Kupo 350 Runway Base Stand C-Stand Dolly fits “turtle base” C-Stands and also fits any C-Stand with a standard 28mm mounting fixture. Adding wheels to the base of your C-Stand makes easy work of moving the largest lighting setups around in the studio. The Kupo 350 is a heavy duty c-stand dolly is able to support a massive 70kg load!

  • Sydney Camera Hire’s C-Stand 40″ with sliding leg & quick release, including grip and 40″ arm is a steel lighting support with 2 risers and 3 sections that extends to a maximum height of 313 cm.

    Also included in the kit is one Grip Arm and one 2.5″ Grip Head, either black or silver as determined by the kit ordered.

  • Sydney Camera Hire’s C-Stand 40″ with sliding leg & quick release, including grip and 40″ arm is a steel lighting support with 2 risers and 3 sections that extends to a maximum height of 313 cm.

    Also included in the kit is one Grip Arm and one 2.5″ Grip Head, either black or silver as determined by the kit ordered.

    • Most versatile professional 3-axis stabilization system
    • Monocoque carbon fiber frame design
    • High torque motors supporting cameras up to 30 lbs
    • Fine tune balancing for precision control
    • Self-heating hot-swappable batteries
    • On-board power for camera and accessories
    • Integrated camera controls
    • Built-in GPS & compatible with DJI A3 Flight Controller
  • Sydney Camera Hire’s DJI Ronin RS3 is the update to the popular DJI Ronin RS2. It features a higher payload limit, improved handling and a raft of new accessories reach out to Sydney Camera Hire to rent the DJI Ronin RS3.

    The DJI RS3 Pro Gimbal Stabiliser is sleeker and more powerful than the Ronin RS2 and weighs only 1.5kg. Capable of working with payloads up to 4.5 kg the RS3 can support and stabilise cameras like the RED Komodo-X, Sony FX6 or Canon C70.


Showing 1–16 of 26 results