Sydney Camera Hire’s 20″ Master C-Stand with Sliding Leg Kit (black) is a steel lighting support “C” stand composed of two legs that are spring loaded to open in fixed positions while the third leg is height adjustable by loosening the knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the other legs to level out the stand on uneven terrain or even stairs. The Kupo 20″ Master C-Stand rises to a maximum height of 198cm.
Also included in the kit is one Grip Arm (either black or silver) and one 2.5″ Grip Head, again either black or silver as determined by the kit ordered.
Sydney Camera Hire’s C-Stand 40″ with sliding leg & quick release, including grip and 40″ arm is a steel lighting support with 2 risers and 3 sections that extends to a maximum height of 313 cm.
Also included in the kit is one Grip Arm and one 2.5″ Grip Head, either black or silver as determined by the kit ordered.
Sydney Camera Hire’s Nanlite Forza 60C Colour Adjustable LED is a monolight style light fixture with remarkable light output relative to its size, which comes complete with a battery handle and Bowens mount adapter.
The Nanlite Forza 60C innovatively adopts the RGBLAC six-color mixing technology: integrating additional LED beads of Lime/Amber/Cyan into the traditional RGB light source to fundamentally solve the problem of incomplete colour spectrum of light and the near-daylight spectrum is achieved as well.
Sydney Camera Hire are excited to offer the Forza 60C for hire because units saturation strengthens significantly for colours other than RGB in HSI mode, which means that the Forza 60C can have a cutting edge on-color renditions over other RGB/RGBW/RGBWW fixtures. Full spectrum, wider colour gamut, more accurate color reproduction and more subtle light/colour quality in low saturation can all be delivered.
Ultra Bright Output
The 60C employs a COB LED module to output 12810 Lux at 5600K at 1 meter, close to the 13830 Lux of the Forza 60B. With with dimming from 100% down to 1% you can quickly adapt the Forza 60B to any scene without adding ND filters or diffusion.
Mini Mount system
The Forza 60C has a mini mount, which allows you to use all Forza 60 modifiers. The included Bowens adapter will allow you to attach standard Bowens modifiers, making the Forza 60C compatible with a massive selection of light modifiers, including but not limited to NANLITE’s line of softboxes projection mounts, and lanterns.
Lightweight Compact Design
Created to eliminate the difficulties of travelling with large light fixtures the Forza 60C weighs only 1.08kg (not including reflector) and is compact enough to be easily packed into your camera bag.
Practical Effects
The Forza 60C includes 15 different practical lighting effects — HUE Loop, CCT Loop, INT Loop, Flash, Pulse, Storm, TV, Paparazzi, Candle/Fire, Bad Bulb, Fireworks, Explosion and Welding. All of these are designed to enhance your work and save you time creating complex lighting scenarios.
Power Anywhere
Optimized for use in the studio or on location, the Forza 60C can run off either the included AC adapter, the included NPF battery handle using 2 x Sony style NP-F batteries (not included). It can also be powered by an optional D-tap cable plugged into a 14.8V V-Mount battery, or the Optional V-Mount battery handle. With so many power options, you can operate in any location regardless of power availability.
Silent Cooling system
The Forza 60C is equipped with a 60,000 hours lifetime rating. Ensuring the fixture performs at its best for longer. Emitting a low 20dB audible output at full power, it is at home in even the most sound-sensitive situations. Forza 60C also supports turning off the fan to achieve complete silence at lower power outputs.
Battery Handle Included
Operate the Forza 60C with the convenient BH-FZ60 battery handle, and power the light from 2 x NPF Batteries (available separately) Use the Forza 60C with light modifiers that use the common Bowens mount using the included AS-BA-FMM adaptor.
Sydney Camera Hire’s Master High Cine Stand features an all-steel construction with black powder coated finish. The high cine stand features a triple function universal head, the head features both a 28mm (1-1/8″) junior receiver and a 16mm (5/8″) baby receiver, plus a multi-direction 16mm (5/8) stud. It has a leveling leg that enables the user to extend one leg more than the others to level stand on an incline like stairs or uneven terrain. Whether you are mounting large HMI, green screen or a boom, this stand can safely support your lighting at full height due to its strength and large 140cm footprint diameter for great stability.
Sydney Camera Hire’s 20″ Master C-Stand with Sliding Leg Kit (black) is a steel lighting support “C” stand composed of two legs that are spring loaded to open in fixed positions while the third leg is height adjustable by loosening the knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the other legs to level out the stand on uneven terrain or even stairs. The Kupo 20″ Master C-Stand rises to a maximum height of 198cm.
Also included in the kit is one Grip Arm (either black or silver) and one 2.5″ Grip Head, again either black or silver as determined by the kit ordered.