Sydney Camera Hire’s C-Stand 40″ with sliding leg & quick release, including grip and 40″ arm is a steel lighting support with 2 risers and 3 sections that extends to a maximum height of 313 cm.
Also included in the kit is one Grip Arm and one 2.5″ Grip Head, either black or silver as determined by the kit ordered.
Risers: 2
Sections: 3
Fixed Stand Adapter: 5/8 in (16 mm)
Closed Length: 132.5cm
Maximum Height: 313 cm
Footprint Diameter: 95cm
Weight: 9.1 kg
Maximum Load: 10 kg
All equipment is available for delivery Australia-wide or pick-up from Disney Studios Australia, Moore Park.
When enquiring please let us know your delivery details and we'll provide relevant pricing when quoting. Pick-up is free.
Sydney Camera Hire’s Nanlite Pavotube II 30X Tube light kit will let your creativity run wild. The new model of Pavo tubes now encompass pixel control, giving creatives endless ways to light. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with a maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 2700K-12000K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs.
It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. Now with more advanced effect modes, the 30X has 15 in built practical effects and with the new pixel feature adds another 10 pixel effects to enhance your lighting and creativity.
With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.
The housing has been upgraded to a robust metal housing, giving more confidence with your lighting. New and improved LED display and soft buttons make the unit much easier to use.
Supplied in hard carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall.
Sydney Camera Hire’s Pavotube’s have octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the throw of the lighting.
Ideal for use overhead or to raise the ambient illumination level, the Nanlite Lantern 120 Softbox combines the omnidirectional light quality of “China Balls” with the durability and portability of a modern softbox.
Utilizing a 47″ spherical design, the Nanlite Lantern 120 has a broad 270° beam angle, allowing film makers to spread light in all directions and fill your set with soft, even light.
The Nanlite Lantern Softbox from Sydney Camera Hire includes a light control skirt set, which can be quickly attached to control the 270° beam spread and can also be rolled up or down to flag off unwanted light.
The Lantern 120 features an Easy- Up speed ring with spring-loaded rod locks. Quickly snap the rods into place to set up the lantern and then release them at the touch of a button for break down.
Created to be compatible with Nanlite’s Forza Series LEDs, the Lantern 120 utilizes a Bowens Style Speed Ring. This near-universal light modifier mount expands compatibility to an extensive range of LED, strobe, and constant lights.
Sydney Camera Hire’s Nanlite Forza 60C Colour Adjustable LED is a monolight style light fixture with remarkable light output relative to its size, which comes complete with a battery handle and Bowens mount adapter.
The Nanlite Forza 60C innovatively adopts the RGBLAC six-color mixing technology: integrating additional LED beads of Lime/Amber/Cyan into the traditional RGB light source to fundamentally solve the problem of incomplete colour spectrum of light and the near-daylight spectrum is achieved as well.
Sydney Camera Hire are excited to offer the Forza 60C for hire because units saturation strengthens significantly for colours other than RGB in HSI mode, which means that the Forza 60C can have a cutting edge on-color renditions over other RGB/RGBW/RGBWW fixtures. Full spectrum, wider colour gamut, more accurate color reproduction and more subtle light/colour quality in low saturation can all be delivered.
Ultra Bright Output
The 60C employs a COB LED module to output 12810 Lux at 5600K at 1 meter, close to the 13830 Lux of the Forza 60B. With with dimming from 100% down to 1% you can quickly adapt the Forza 60B to any scene without adding ND filters or diffusion.
Mini Mount system
The Forza 60C has a mini mount, which allows you to use all Forza 60 modifiers. The included Bowens adapter will allow you to attach standard Bowens modifiers, making the Forza 60C compatible with a massive selection of light modifiers, including but not limited to NANLITE’s line of softboxes projection mounts, and lanterns.
Lightweight Compact Design
Created to eliminate the difficulties of travelling with large light fixtures the Forza 60C weighs only 1.08kg (not including reflector) and is compact enough to be easily packed into your camera bag.
Practical Effects
The Forza 60C includes 15 different practical lighting effects — HUE Loop, CCT Loop, INT Loop, Flash, Pulse, Storm, TV, Paparazzi, Candle/Fire, Bad Bulb, Fireworks, Explosion and Welding. All of these are designed to enhance your work and save you time creating complex lighting scenarios.
Power Anywhere
Optimized for use in the studio or on location, the Forza 60C can run off either the included AC adapter, the included NPF battery handle using 2 x Sony style NP-F batteries (not included). It can also be powered by an optional D-tap cable plugged into a 14.8V V-Mount battery, or the Optional V-Mount battery handle. With so many power options, you can operate in any location regardless of power availability.
Silent Cooling system
The Forza 60C is equipped with a 60,000 hours lifetime rating. Ensuring the fixture performs at its best for longer. Emitting a low 20dB audible output at full power, it is at home in even the most sound-sensitive situations. Forza 60C also supports turning off the fan to achieve complete silence at lower power outputs.
Battery Handle Included
Operate the Forza 60C with the convenient BH-FZ60 battery handle, and power the light from 2 x NPF Batteries (available separately) Use the Forza 60C with light modifiers that use the common Bowens mount using the included AS-BA-FMM adaptor.
Whether you are mounting a 10K Fresnel 430cm in the air or you are flying a 6m x 6m Butterfly frame, Sydney Camera Hires overhead roller stands are ready to meet your needs.
Each riser is spring cushioned as a safety feature to protect lighting fixtures from a sudden drop if the locking collar becomes loose. The solid steel construction has a maximum load capacity of 40kg and is equipped with braked casters to easily reposition heavy loads. Each caster is equipped with a peg that extends past the wheel allowing it to stand upright when collapsed. The Medium Roller Stand also features a 4-1/2″ grip head with additional offset 1-1/8″ junior receiver.
